Nursing Elites

1. Diamagnetism refers to a material's weak:

• A. Attraction to magnetic fields
• B. Repulsion to magnetic fields
• C. Amplification of magnetic fields
• D. Indifference to magnetic fields

Correct answer: B

Rationale: Diamagnetism refers to a material's weak repulsion to magnetic fields. When diamagnetic materials are placed in an external magnetic field, they create an opposing magnetic field, leading to repulsion. This is why choice B, 'Repulsion to magnetic fields,' is the correct answer. Choices A, C, and D are incorrect because diamagnetic materials do not exhibit attraction, amplification, or indifference to magnetic fields.

2. A Carnot cycle is a theoretical ideal heat engine operating between two heat reservoirs at different temperatures. Which of the following statements is NOT true about a Carnot cycle?

• A. The efficiency of a Carnot cycle is solely dependent on the absolute temperatures of the hot and cold reservoirs.
• B. It is a reversible cycle, meaning the process can be run in both directions with the same efficiency.
• C. It operates isothermally at the hot and cold reservoir temperatures.
• D. It is the most efficient heat engine operating between the same two reservoir temperatures.

Correct answer: C

Rationale: The statement that is NOT true is C. Although part of the Carnot cycle operates isothermally, not the entire cycle operates isothermally. The Carnot cycle consists of both isothermal and adiabatic processes. Choice A is incorrect because the efficiency of a Carnot cycle is indeed solely dependent on the absolute temperatures of the hot and cold reservoirs. Choice B is correct as a Carnot cycle is reversible, allowing the process to be run in both directions with the same efficiency. Choice D is also true as the Carnot cycle is the most efficient heat engine operating between the same two reservoir temperatures. Therefore, the correct answer is C.

3. A 120-volt heat lamp draws 25 amps of current. What is the lamp’s resistance?

• A. 96 ohms
• B. 104 ohms
• C. 150 ohms
• D. 4.8 ohms

Correct answer: D

Rationale: To find the resistance of the lamp, we use Ohm’s Law, which states that resistance (R) is equal to voltage (V) divided by current (I), expressed as: R = V / I. Given that the voltage (V) is 120 volts and the current (I) is 25 amps, we substitute these values into the formula: R = 120 V / 25 A = 4.8 ohms. Therefore, the resistance of the lamp is 4.8 ohms. Choice A, 96 ohms, is incorrect as it is not the result of the correct calculation. Choice B, 104 ohms, is incorrect as it does not match the calculated resistance. Choice C, 150 ohms, is incorrect as it is not the correct resistance value obtained through the calculation.

4. Entropy (S) is a thermodynamic property related to the system's disorder. According to the second law of thermodynamics, in a spontaneous process:

• A. The total entropy of the system and surroundings increases.
• B. The total entropy of the system and surroundings decreases.
• C. The total entropy of the system remains constant.
• D. The total entropy of the surroundings increases, while the system's entropy decreases.

Correct answer: A

Rationale: The second law of thermodynamics asserts that the entropy of an isolated system (or the combined system and surroundings) will always increase in a spontaneous process, reflecting an increase in disorder. Therefore, the correct answer is that the total entropy of the system and surroundings increases. Choice B is incorrect because entropy always tends to increase in a spontaneous process, as dictated by the second law of thermodynamics. Choice C is incorrect as entropy typically increases in natural processes. Choice D is incorrect because the second law of thermodynamics states that the total entropy of the system and surroundings always increases in a spontaneous process.

5. For steady, incompressible flow through a pipe, the mass flow rate (ṁ) is related to the fluid density (ρ), cross-sectional area (A), and average velocity (v) via the continuity equation:

• A. ṁ cannot be determined without additional information
• B. ṁ = ρvA
• C. Bernoulli's principle is solely applicable here
• D. The equation of state for the specific fluid is required

Correct answer: B

Rationale: The continuity equation for steady, incompressible flow states that the mass flow rate is the product of the fluid's density, velocity, and cross-sectional area. Hence, ṁ = ρvA. Choice A is incorrect because the mass flow rate can be determined using the given formula. Choice C is incorrect as Bernoulli's principle does not directly relate to the mass flow rate calculation. Choice D is incorrect as the equation of state is not needed to calculate the mass flow rate in this scenario.

Similar Questions