Nursing Elites

1. Archimedes' principle explains the ability to control buoyancy, allowing:

• A. Objects to sink regardless of density differences.
• B. Airplanes to generate lift for flight.
• C. Submarines to adjust their buoyancy for submergence and resurfacing.
• D. Helium balloons to overcome gravity and float.

Correct answer: C

Rationale: Archimedes' principle states that the upward buoyant force acting on an object submerged in a fluid is equal to the weight of the fluid displaced by the object. Submarines control their buoyancy by adjusting the volume of water they displace, which allows them to submerge and resurface. Choice C is correct because it directly relates to the principle of buoyancy and how submarines utilize it. Choices A, B, and D are incorrect because they do not accurately reflect the application of Archimedes' principle in controlling buoyancy for submergence and resurfacing.

2. What force was applied to the object that was moved if 100 N⋅m of work is done over 20 m?

• A. 5 N
• B. 80 N
• C. 120 N
• D. 2,000 N

Correct answer: A

Rationale: Work is calculated using the formula Work = Force x Distance. Given that 100 N⋅m of work is done over 20 m, we can rearrange the formula to solve for Force. Force = Work / Distance. Plugging in the values, we get Force = 100 N⋅m / 20 m = 5 N. Therefore, the force applied to the object that was moved is 5 N. Choice B (80 N) is incorrect because it doesn't match the calculated force of 5 N. Choice C (120 N) is incorrect as it is higher than the calculated force. Choice D (2,000 N) is incorrect as it is significantly higher than the correct force of 5 N.

3. For steady, incompressible flow through a pipe, the mass flow rate (ṁ) is related to the fluid density (ρ), cross-sectional area (A), and average velocity (v) via the continuity equation:

• A. ṁ cannot be determined without additional information
• B. ṁ = ρvA
• C. Bernoulli's principle is solely applicable here
• D. The equation of state for the specific fluid is required

Correct answer: B

Rationale: The continuity equation for steady, incompressible flow states that the mass flow rate is the product of the fluid's density, velocity, and cross-sectional area. Hence, ṁ = ρvA. Choice A is incorrect because the mass flow rate can be determined using the given formula. Choice C is incorrect as Bernoulli's principle does not directly relate to the mass flow rate calculation. Choice D is incorrect as the equation of state is not needed to calculate the mass flow rate in this scenario.

4. What is the purpose of a switch in a circuit?

• A. To reverse the direction of alternating current
• B. To increase the voltage of the battery or cell
• C. To increase the resistance of wires in the circuit
• D. To allow the circuit to open and close

Correct answer: D

Rationale: The purpose of a switch in a circuit is to allow the circuit to open and close. When the switch is turned on, it provides a complete path for the current to flow through the circuit. When the switch is turned off, it breaks the circuit, stopping the flow of current. This function of opening and closing the circuit using a switch is essential for controlling the flow of electricity in various electrical devices and systems. Choices A, B, and C are incorrect because a switch does not reverse the direction of current, increase voltage, or increase resistance in a circuit; its primary function is to open and close the circuit.

5. In an adiabatic process, there is:

• A. No heat transfer (Q = 0) between the system and the surroundings.
• B. Isothermal compression or expansion (constant temperature).
• C. Constant pressure throughout the process (isobaric process).
• D. No change in the system's internal energy (energy is conserved according to the first law).

Correct answer: A

Rationale: In an adiabatic process, choice A is correct because adiabatic processes involve no heat transfer between the system and its surroundings (Q = 0). This lack of heat transfer is a defining characteristic of adiabatic processes. Choices B, C, and D do not accurately describe an adiabatic process. Choice B refers to an isothermal process where temperature remains constant, not adiabatic. Choice C describes an isobaric process with constant pressure, not specific to adiabatic processes. Choice D mentions the conservation of energy but does not directly relate to the absence of heat transfer in adiabatic processes.

Similar Questions