Nursing Elites

1. What is the mathematical expression for work (W)?

• A. W = F / d
• B. W = F x d
• C. W = d / F
• D. W = F^2 x d

Correct answer: B

Rationale: The correct formula for work (W) is given by the equation W = F x d, where F represents force and d represents the displacement in the direction of the force. Work is calculated by multiplying the force applied by the distance over which the force is applied. Choice A (W = F / d) is incorrect as work is not calculated by dividing force by distance. Choice C (W = d / F) is incorrect because work is not calculated by dividing distance by force. Choice D (W = F^2 x d) is incorrect as work is not calculated by squaring the force and then multiplying by distance.

2. If a wave has a frequency of 60 hertz, which of the following is true?

• A. It completes one cycle per minute.
• B. It measures 60 m from crest to crest.
• C. It completes 60 cycles per second.
• D. It measures 60 m from crest to trough.

Correct answer: C

Rationale: The frequency of a wave is the number of cycles it completes in one second. A wave with a frequency of 60 hertz completes 60 cycles per second. Therefore, choice C is correct. Choice A is incorrect because a frequency of 60 hertz means 60 cycles per second, not per minute. Choice B is incorrect as the frequency of the wave does not determine the distance from crest to crest. Choice D is also incorrect as the frequency does not relate to the distance from crest to trough.

3. What is the phenomenon by which light bends as it passes through a prism known as?

• A. Reflection
• B. Electrical conduction
• C. Diffraction
• D. Refraction

Correct answer: D

Rationale: Refraction is the phenomenon by which light bends as it passes through a prism or any other medium boundary. When light transitions from one medium to another, such as air to glass in the case of a prism, it changes speed and direction due to the change in the medium's refractive index. This change in speed causes the light to bend. Reflection, on the other hand, is the bouncing back of light when it hits a surface. Diffraction refers to the bending of light around obstacles or through narrow openings. Electrical conduction involves the movement of electrically charged particles through a conductor, which is unrelated to the bending of light.

4. In the mechanical power equation P = E / t, power is measured in ___________.

• A. ohms
• B. Joules
• C. volts
• D. watts

Correct answer: D

Rationale: In the mechanical power equation P = E / t, power is measured in watts. Watts are the standard unit of power in the International System of Units (SI), named after the Scottish engineer James Watt. Watts are defined as joules per second, reflecting the rate at which energy is transferred or converted. Ohms (choice A) are the unit of electrical resistance, Joules (choice B) are the unit of energy, and volts (choice C) are the unit of electric potential difference. Therefore, the correct answer is watts as it directly relates to power in the given equation.

5. In fluid machinery, pumps are designed to primarily increase the fluid's:

• A. Pressure
• B. Velocity only
• C. Both pressure and velocity
• D. Neither pressure nor velocity

Correct answer: A

Rationale: Pumps in fluid machinery are designed to primarily increase the fluid's pressure. This increase in pressure allows the fluid to flow through the system efficiently and overcome resistance. While pumps can also impact the velocity of the fluid to some extent, their main function is to elevate the pressure to facilitate the movement of the fluid within the system. Choice B is incorrect because pumps do not focus solely on increasing velocity. Choice C is incorrect as while pumps can affect velocity, their primary purpose is to boost pressure. Choice D is incorrect as pumps aim to increase either the pressure, velocity, or both.

Similar Questions